This blog is not intended for the General Public, But all blog readers are Welcome.

This is mostly Notes and Links for myself,
and maybe someday, this will provide insight and a bit of history for all the kids that call me Grandpa;
NutMeg, C-Kid, Z-Man, Lulu, and Dabbers,
I-Man and O-Man,
J-Man and S-Man,
Nat, A-Girl, and J-Boy.

For reference in this blog: Chip is my Son, and Carolyn is my Sister.

Sunday, November 27, 2011

New Work Started

My son, Chip and I have started new work on the Hanger/Shop (Nov 3, 2011). The goal is to:

Finish Move/Install of the Water Heater and Pressure Tank
  • DONE
  • 100% 
Buy and Finish Installing Kitchen and Laundry Cabinets
  • Cabinets Specified and Purchased
  • Cabinets have arrived, 3 are on backorder
  • Cook Top on Order
  • All Cabinets Received, Counter Top Later
  • Installed Upper in Laundry, Install Most Upper in Kitchen
  • Finished Installing all Kitchen Uppers
  • Vent for MicroWave Installed over/in upper Cabinets
  • MicroWave Installed
  • All Lowers and placed and attached to the walls, ready for counter tops 
  • Vent for Cook Top Installed
  • Laundry Counter Top and Sink completely installed - works !
  • Kitchen Counter Top Joined and installed, all cutouts for Sinks and Cook Top are ready.
  • Finished Installing Counter Tops and Hardware.
  • DONE
  • 100%

Laundry Cabinets

Insulate the Low Bay Fold up Door, Install Weather boot at the bottom
  • DONE
  • 100%
Insulate and Finish the Window Step in the Apartment
  • Not Started
  • 0%
Install the Shop Vacuum System
  • Conduit Ran to Power Box near Final Location
  • 5%
Install a new Air Compressor and Air Lines to the Shop
  • Conduit and Most Air Lines Installed
  • Compressor Received, It need a new pallet made, Power Cord and Air connections
  • Electricity is Now Installed, only one Equipment Ground Lug need to be installed
  • Compressor Installed, Hooked up and now being used
  • DONE
  • Only the air lines need to be extended into LowBay when Vacuum is Installed.
  • 99%

Install small Electric Heater in the High Bay
  •  Mounting Bracket Made 
  • Bracket was now Installed.
  • A special Mounting Bolts purchased
  • Conduit Installed and Wired
  • DONE
  • 100%


The items marked DONE, have be completed, other status provided.

Publish Date of the Blog Entry will reflect a Status Update.